Activity

Sliding Patio Door Repairs

A sliding patio door is a wonderful option to let in more natural light and let you enjoy your outdoor space. But, if the door isn’t moving smoothly or looks dingy it can be a real headache.

Many of these issues are easily fixable with some DIY skills. Here are some common problems and solutions.

Dirty or damaged tracks

Over time the sliding patio door’s tracks can be clogged with dust, dirt and other debris. Regular cleaning and lubrication will help your sliding patio door move smoothly.

Cleaning the track is the first step. A dirty track can cause the door to snag, or even make it impossible for it to be shut or open. Begin by sweeping off any loose debris. Use a brush that contains the cleaning solution to eliminate any visible grime. Be sure to clean the corners and nooks and also any areas where the door meets the frame.

After you’ve scrubbed it, wash the track with a bucket or hose of clean water. Apply lubricant from the store to prevent rust and to displace water. Before reinstalling the door try moving it back and forth to determine whether it moves easily.

If your door still sticks, it could be that the rollers are damaged or misaligned. This can also cause the door to move slower. In the majority of instances, you can correct this by readjusting the wheels and then lubricating them. It could be time for a replacement when your door is old. Before reassembling the track, lay a drop cloth on the floor and remove the two plugs that cover the roller adjustment screws at the bottom of the frame. Install a screwdriver in each hole and turn them counterclockwise to retract the rollers. This will give you the space you need to remove the door and set it on sawhorses.

A faulty handle

In time the handle on your sliding door will become loose from the strike plate it hangs on. The good thing is that a loose handle can be fixed easily. Use a screwdriver and tighten the screws that hold the door handle to the strike plate. However, be careful not to tighten too much, because this could cause damage to the mechanism inside and cause the handle to no longer operate correctly.

If a sliding patio door becomes difficult to slide, it is often caused by debris that has clogged the rollers. Hair, dirt and other messes are often stuck in the tracks which causes the door to stop smoothly sliding. To ensure smooth operation, begin by cleaning the rollers.

Another common issue is when the lock on your sliding patio door isn’t working correctly. This could be caused by a misaligned or broken handle. The lock mechanism could be repaired or the handle adjusted.

A screen door that doesn’t shut or open isn’t a pleasant experience. A faulty screen can be dangerous. If patio door repairs near me isn’t aligned properly with the door frame, it will rub against the frames and cause wear and tear on both the screen as well as the door. If your screen isn’t functioning correctly, the fix is fairly simple. Check whether the latching bar is still in place. If it is not in place, take it out of the way it and replace it with an alternative. Reinstall the screen after replacing the rod for latching. Make sure the hinges are correctly set. For a more polished appearance make sure you attach screw covers to the holes in the frame.

Poor weatherstripping

The weather stripping is used to seal the gap between your frame and door, preventing drafts, cold and pests. If yours is cracked or discoloured It’s time to replace it. This is usually pretty easy to do. Some people only replace the worn part, but it is more straightforward to replace the entire item.

First, ensure that the gap isn’t near the seating point where the weather strip is attached to the frame. If not, you’ll need to seal the weather strip to the frame using weather strip adhesive.

Then, take a look at the perimeter of your weather strip. Use your dollar bill to check whether the weather strip is sealed. Place the bill halfway across the seal, then close the door. If it is easy to pull away from the metal flange on the weather strip, you need to replace it. If it is easy to remove, it is time to replace the weather strip.

You may require lubrication of your run channel (the groove comprised of rubber and felt on both sides of the door) in order to prevent ice buildup during winter. You can buy a spray lubricant from your local hardware store. Be careful not to get it on the glass.

Another option is to apply a thin layer of sand beneath your door prior to the snow starts to fall to prevent it from sticking as salt would. Don’t leave sand on the bottom of your door as it will damage the rubber and concrete of the weather strip.

Damaged Glass

There are a myriad of circumstances that can result in sliding glass for patio doors becoming cracked or shattered. If your glass for your patio door is damaged by a bump or bump, or some other occurrence it is crucial to replace it immediately to ensure that your home is properly insulated and sealed.

Sliding doors can be damaged over time as a result of their regular use and exposure. Rusting rollers, faulty handles and bent tracks are some of the issues that could result in the patio door not working properly. Sliding patio repair specialists can quickly spot the issue and make the necessary repairs or replace the components.

A damaged patio door can impact your energy bills in addition to the obvious damage. A gap between the frame of the patio door and the glass can result in drafts and temperature differences. This is costly in both the summer and winter when you are spending money to cool or heat your home.

You can replace a broken panel on your patio without having to remove the entire door. In certain situations it is the best option if you’re looking to get your door back functioning as quickly as possible. Whatever the case, whether you’re replacing the glass or the frame, it is crucial to have all of the proper tools on hand to ensure that the task can be done quickly and safely. These include gloves and a small pry bar or hammer, a putty knife, tape, measuring tape, and a replacement glass. DIY Door Store offers all these materials so you can repair your broken patio doors easily and affordably.

Frames that aren’t secured or damaged

Sliding patio door systems are designed to allow an easy transition from indoor to outdoor and provide an unnatural flow. But, as with any other piece of home equipment they are susceptible to wear and tear over time that affects their functionality. While some damages may be simple to repair by yourself, others require professional assistance to ensure that your door remains in optimal condition.

If you can see evidence of damage, such as scratches and dents, it’s probably time to replace your sliding door. These damages do not just diminish the aesthetics of your patio doors, but they also affect security and energy efficiency.

A roller or track that is not aligned is common issues that cause your sliding door to not function correctly. This is usually due to debris or dirt accumulation on the track and can usually be resolved by using a pair of pliers to straighten the rails.

Cleaning the tracks and rollers on your sliding patio doors is crucial. Dirt can cause them to become stiff or stuck, preventing them from moving easily. Remove any obstructions using hand-brushes, vacuums or even spraying down with a jetwash. Applying a silicone-based lubricant on your tracks will help to facilitate smooth operation and prevent premature wear.

When repeated, slamming on the patio door can cause serious damages to the frame as well as the glass panel. This can result in a loose or broken frame, bent tracks, and handles that are difficult to open and close. Screen doors that slide are typically more susceptible to this kind of damage because the frames are generally less robust than those on glass sliding doors. Fortunately, if you have damaged screen door frames it is usually repaired by sealing the gap with silicone lubricant and then applying a new sealant around the perimeter of the glass.